Trike City Scooters






We not only convert scooters to trikes, we also sell a scooter trike conversion kit that allows you to build your own 3 wheel trike. With a few modifcations this trike kit can convert almost any scooter to a real trike.
In the photo to the right is our trike conversion kit. It comes with all the hardware, caliper and brake hose, fenders, fender brackets, rear axle assembly as shown, swing arm, 2 shocks, chain, master link, and a 25 tooth sprocket with spline attached for the *VOG engine. It also comes with a 31 or 34 tooth sprocket, spline plate which can be used on the VOG or any other scooter.

This scooter trike kit fits the 260/300/400 *VOG engines with little or no modifications.

You can have a local scooter shop, motorcycle shop, or fabricator shop install the kit for you.

If you are installing the trike conversion kit to a VOG engine, it will take you about 8 hours.

Our scooter trike conversion kit can be used to convert almost any scooter to a trike. To convert a scooter other that a *VOG engine the swing arm needs to be modified. Similar to what is shown on our CN250 conversion page.

You can contact us for more information if you have any questions.

This is the drive sprocket and spline plate that power the rear axle assembly. It is used on conversions other than the VOG or when not using the 25 tooth sprocket. It requires that the spline plate be mated to your spline. We can do this for you if needed. We can also do any other modication to the drive sprocket assembly that you need.

We can supply a sprocket with any number of teeth you may require. In stock are 25, 31, 34, and 37. Our order page will guide you.

This kit costs $1199 plus $99 shipping to most of the lower 48 states.
Would you like to try and build one, we can help. All the instructions you need are right her on our website. Whether you are installing our trike kit to a VOG or modifying the kit to any other scooter. And remember you can call and ask questions as you build. Order one now

The VOG engine is the Linhai-Yamaha style engine. Used on many of the Chinese scooters as well as the earlier Yamaha scooters. The VOG style engine is used on the earlier Yamaha, DAIX, Icebear, TMEC, Linhai and many other 260cc to 400cc scooters. The piston cylinder head is horizontal to the engine, pointing forward.

|©2018 Trike City USA